Holley

The CAN to USB communication cable provides the user with real tuning time access to the ECU. This cable can be used with Holley EFI, Sniper EFI, and Terminator X Tuning Software. Which can be downloaded for free from the Support section of our website!...

This is only used on applications using a CD Box, such as an MSD 6AL, while not using timing control.

This harness gives you the access to 2 Ground Trigger Inputs, 2 Ground Trigger Outputs, also the Points Output, Tachometer output, and Digital Gauge Output Wires. The Input Grounds can be used for things such as AC Kick, and nitrous stage activation! The...

The CAN to USB communication cable provides the user with real tuning time access to the ECU. This cable can be used with Sniper 2 EFI Tuning Software. Which can be downloaded for free from the Support section of our website! Features: 8’...

Holley EFI fuel kits are the perfect addition to your Sniper EFI or Holley EFI kit. They are engineered using a Holley fuel filter coupled with quality Earl's Vapor Guard plumbing to provide a fuel system tailored to the needs of your EFI System. The...

Holley EFI fuel kits are the perfect addition to your Sniper EFI or Holley EFI kit. They are engineered using Holley fuel pumps, regulators and filters coupled with quality Earl's plumbing to provide a fuel system tailored to the needs of your EFI System...

The Power Distribution Module (PDM) is a cost-effective and optional accessory that isolates the core of your EFI and ignition wiring into one, easy to use location. Simply slide the stripped wire ends under the positive lock connector and tighten down...

Replacement Idle Air Control (IAC) Motor for Sniper EFI TBI Systems, Sniper 90/92/102mm Throttle Bodies, Terminator TBI, Avenger 4bbl TBI, HP 4bbl TBI, Commander 950 & Digital Pro-Jection Systems. One of the signs of a vehicle with a rough idle is a...

Direct upgrade for existing HyperSpark ignition box, featuring a smaller form factor and hotter spark. This low profile box can fit nearly anywhere inside of your engine bay or cockpit. The HyperSpark 2 ignition box packs all of the proven features of...

The Holley EFI CAN splitter allows you to add an additional CAN device to your Sniper EFI or Terminator X installation, without needing to unplug the handheld. This easy to install CAN splitter simply plugs into the CAN connector on your main harness,...

Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? This harness is designed to do exactly that! The Sniper adapter harness is a plug-and-play solution to connect your existing Sniper 1 wiring harness to...

This Throttle Position Sensor fits all Terminator 4150 Throttle Bodies, and Sniper EFI 4150 Throttle Bodies. Additionally, it is the service replacement sensor for the following: 502-9,112-577,112-578,112-587,112-588.

This ignition adapter ensures your Sniper EFI ignition installation is a snap! Simply plug up both connectors, terminate the Pink Wire to a Switched 12v Ignition Source, and you're finished. Features: Plug and Play Adapter for Sniper EFI with Holley...

The Holley EFI Can Adapter/Power Harness adapts two pin Holley main harness CAN connectors to new style 4 pin CAN devices.

The Holley EFI 5-inch Digital Dash comes out of the box, ready to plug and play with your Gen 1 Sniper EFI, Terminator X or X MAX, and Holley EFI Dominator or HP ECU. The 5-inch digital touch screen display is pre-loaded with 3 easy to read layouts that...